Single-Ply Membrane Systems
Single-Ply
EPDM (Rubber)
Lightweight, synthetic elastomer used since the early 1970s. EPDM's resilience, tensile strength, and resistance to ozone, UV light, and ponding water make it an outstanding roofing material.
- Installation: Fully Adhered, Ballasted, or Mechanically Attached
- Superior Elongation: Adapts to temperature extremes
- Fleece Back: Hot asphalt or low-rise adhesive compatible
- Economical: Minimum maintenance and repair costs
- UL and FM approved systems available
- Strong Single Source warranty
Single-Ply
Thermoplastics (PVC & TPO)
Lightweight, reinforced, light-colored membrane used since the early 1970s. Highly resistant to chemical atmospheres, ozone, UV light, tears, and extreme weather conditions.
- Reinforced Membrane: Excellent tear resistance
- Chemical Resistance: Oils, most chemicals and pollutants
- Fire Resistance: Excellent fire resistance properties
- Heat Welding: Superior seam strength
- Weather Resistance: Highly resistant to ozone and UV
- UL and FM approved systems available
Retrofit
Retrofit Over Metal
With a variety of attachment methods, our Metal Retrofit System can be configured to most metal roof designs and meets national, state, and local building codes.
- No Panel Replacement: Eliminates panel replacement cost
- FM Ratings: Meets FM I-60 and I-90 ratings
- Energy Savings: Additional R-value reduces energy costs
- System Variety: Various single-ply roof systems available
- Minimal Weight: Minimal addition to existing roof load
- Meets all national, state & local codes
Coating & Surface Systems
Coating
Acrylic Roof System
A special formulation of non-toxic, water-based acrylics that cures into a continuous elastomeric membrane. Provides an excellent restoration solution for metal roofs.
- Properties: Excellent adhesive and elongation characteristics
- Durability: Withstands UV, temperature extremes & mildew
- Compatibility: Adheres to most building substrates
- Colors: White and beige; special colors on request
- Application: Brush, sprayer or roller
- UL and FM approved; VOC compliant
Coating
Coating Systems
Materials for roof surfacing, maintenance or repair to enhance weatherability, reflectivity, UV protection, or aesthetics of the installed roof system.
- EPDM Specialty: Special formulation for EPDM roofs (white/aluminum)
- Aluminum Coatings: Highly sun-reflective finish for multiple roof types
- Wet Surface: Available for damp or dry roof surfaces
- ASTM Compliance: Meets or exceeds ASTM standard specifications
- Material and labor warranties available
Built-Up & Advanced Systems
Built-Up
Built-Up Roofing (BUR)
Multiple layers of felts, fabrics or mats saturated with bitumen, installed in alternating solid mopping of hot bitumen or cold adhesives.
- Multi-Layer: Ideal for resisting mechanical damage
- Installation: Hot bitumen (asphalt or coal tar) or cold adhesives
- Surface Options: Gravel, mineral cap sheets or smooth coatings
- Materials: Felts, fabrics or mats saturated with bitumen
Bitumen
Modified Bitumen
Polymer modified bitumen sheet membranes (SBS and APP) have been used since 1975, composed of asphalt reinforced with polyester or fiberglass.
- Polymer Types: SBS (styrene-butadiene) and APP
- Reinforcement: Polyester or fiberglass reinforced
- Installation: Hot bitumen, torch applied or cold adhesive
- Multiple Layers: Typically multi-ply; factory surfacing available
- Traffic Resistance: Heavy traffic, puncture and tear resistant
Spray Foam
Spray Polyurethane Foam (SPF)
SPF roofing has been used for over 35 years. No matter the physical shape of the roof, this seamless system can be effectively applied.
- Seamless: Waterproof regardless of roof shape
- Energy Savings: Energy Star certified reflective coating
- Stable: Odorless, mildew and fungi resistant
- High R-Value: Reduces thermal shock from temperature changes
- Lightweight: Won't sag; flexible under building expansion
- Self-Flashing: UL tested and approved; fast application
Steep Slope & Metal Systems
Steep Slope
Steep Slope Systems
Comprehensive range of steep slope solutions for diverse aesthetic and functional requirements across commercial applications.
- Shingles: Standard or dimensional asphalt, metal or synthetic
- Slate: Multi-colored custom-cut stone for historic or rustic look
- Tile: Multi-shaped, custom-sized natural materials
- Metal: Architectural and structural panel roof systems
- Wood Shakes: Cedar split shakes for aesthetic appeal
- Custom Options: Custom colors and finish coatings available
- Long-term weatherability and low maintenance
Metal
Metal Roof, Siding & Mansard Systems
Concealed panel system provides versatility, durability, and aesthetic appeal for both industrial and architectural applications.
- Concealed Fasteners: Limited penetration, no fastener corrosion
- Applications: Industrial and Architectural
- Design Variety: Wide range of designs and colors
- Retrofit Systems: Suited to most structural designs
- Complete Systems: Matching siding and mansard systems
- Manufacturer's and single source warranties available